4" 304 Stainless Steel Double Action Spring Hinge | Highly Rust Resistant-Exterior Use

Was: $83.99
Now: $65.99
Write a Review
Ships Same or Next Day
Bulk Pricing:
Buy in bulk and save
Hardware Type:
Swinging Door Spring Hinges
Door Width:
Up to 24 in
Door Width:
Up to 26 in
Door Weight:
Up to 30 lbs
Door Weight:
Up to 50 lbs
Door Weight:
Up to 75 lbs
Hardware Finish:
Stainless Steel
Hold Open Feature:
Non-Hold Open
Door Thickness:
3/4 in-1 in
Door Thickness:
1-1/16 in-1-3/8 in
Custom/ In Stock:
In Stock

4" SUS304 Stainless Steel Double Action Spring Hinge | Saloon Door Hinge | Cafe Door Hinge | Swinging Door Hinge

These hinges are sold individually and are rated for exterior use.

This hinge is a 4" double action hinge that is spring loaded and can be used in many applications such as: a cafe door hinge, swinging door hinge, saloon door hinge or a gate hinge.

Door Specifications

• SUS304 Stainless Steel Material rated for exterior use
• 4" is the height of the flat flange in between the barrels, barrels measure roughly 1" longer
• Door Flange mortised or surfaced applied to edge of door
• Jamb Flange surface applied to jamb
• Non-Beveled Edge on door required
• Double action spring hinge which swings door both directions
• Adjustable spring tension returns doors to center at a desired force
• Non-Hold Open
• Commercial Grade
• Fits door 7/8" to 1-3/8" thick
• Holds Doors up to 60 lbs and 2' (24") wide – requires two hinges
• Holds Doors up to 75 lbs. and 2'2" (26") wide – three hinges

These spring loaded hinges require a total clearance of 7/8”.  If your total gap allowance is less than 7/8” then you will need to mortise the hinges.

Example:  36” wide door opening => Each door (assumes two doors) will be 17.5625” wide. (That leaves enough clearance between the doors and for the hinges to mount)

Hinge Installation Instructions

Hinge Template

Spring Hinge Sizing Guide 


We offer a 30 day return policy, restocking fees may apply.