5" Double Action Spring Hinge | Saloon Door Hinge | Swinging Cafe Doors -4 Finishes

Was: $83.99
Now: $58.99
Write a Review
Ships Same Day or Next Day
Bulk Pricing:
Buy in bulk and save
Hardware Type:
Swinging Door Spring Hinges
Door Width:
Up to 18 in
Door Width:
Up to 24 in
Door Width:
Up to 26 in
Door Width:
Up to 30 in
Door Width:
Up to 32 in
Door Width:
Up to 36 in
Door Weight:
Up to 18 lbs
Door Weight:
Up to 30 lbs
Door Weight:
Up to 50 lbs
Hardware Finish:
Oil Rubbed Bronze
Hardware Finish:
Satin Chrome
Hardware Finish:
Hold Open Feature:
Non-Hold Open
Door Thickness:
3/4 in-1 in
Door Thickness:
1-1/16 in-1-3/8 in
Custom/ In Stock:
In Stock
Option Set:

5" Double Action Spring Hinge | Saloon Door Hinge | Cafe Door Hinge | Swinging Door Hinge

These hinges are sold individually.

This hinge is a 5" double action hinge that is spring loaded and can be used in many applications such as: a cafe door hinge, swinging door hinge, saloon door hinge or a gate hinge.

• 5" is the height of the flat flange in between the barrels, barrels measure roughly 1" longer
• Door Flange mortised or surfaced applied to edge of door
• Jamb Flange surface applied to jamb
• Non-Beveled Edge on door required
• Double action spring hinge which swings door both directions
• Adjustable spring tension returns doors to center at a desired force
• Non-Hold Open
• Commercial Grade
• 3 Finishes Available
• Fits door 1-1/8" to 1-1/2" thick
• Holds Doors up to 65 lbs and 2'6" (31") wide – requires two hinges
• Doors up to 90 lbs. and 3'0" (36") wide – three hinges

These spring loaded hinges require a total clearance of 7/8”.  If your total gap allowance is less than 7/8” then you will need to mortise the hinges.

Example:  36” wide door opening => Each door (assumes two doors) will be 17.5625” wide. (That leaves enough clearance between the doors and for the hinges to mount)

Hinge Installation Instructions

Spring Hinge Sizing Guide 

We offer a 30 day return policy, restocking fees may apply.