Standard Grade Gravity Hinge | Saloon Door Hinge- Brass Finish
This gravity hinge in a brass finish can be used to easily and quickly install your new cafe / saloon doors. You will receive all the hardware and instructions you will need to hang two doors down to the screws. Hardware allows doors to freely swing in each direction.
- For doors 3/4" to 1-3/8" thick
- Holds Open at 125°
- 1 Pair hangs two doors
- Gravity returns door to center
- 30 lb load rating
- Door rises 3/8" when opened
- Easy to install hinges allow your door to swing in both directions
These hinges require a total clearance of 1-1/4".
Example: 36” wide door opening => Each door (assumes two doors) will be 17.375” wide. (That leaves enough clearance between the doors and for the hinges to mount)